Productos
ZigBee Soporta transmission de datos según el protocolo ZigBee de corto alcance | |
Bajo consumo Soporta modos multi-sleep y trigger para reducer el consumo. | |
Soporta 5 I/O Compatibles con canales de 2 señal de onda de 2 pulsos y también contadores de pulsos | |
Diversos modos de conexión/desconexiónEl equipo puede conectarse y desconectarse de la red móvil de diferentes formas incluyendo SMS o llamadas perdidas.También puede desconectarse automáticamente ante la ausencia de datos a transmitir | |
Soprote de backup por SMSEl modem puede enviar los datos a transmitir a través de mensajes SMS en caso de que la conexión a la red GPRS/3G no sea posible o el centro de recepción de datos esté inoperativo. El modem puede volver a la red principal de forma automática. | |
Soporte de apagado/encendido en tiempo realEl consumo es inferior a 1mA en el modo off programado | |
Soporta redes APN / VPDNImprove the security of data transmission |
Features Reference Networking Download
El módem CDMA2000 1X EVDO ZigBee modelo F8614 es un terminal cellular que permite la transmission de datos a través de la red ZigBee de un operador móvil
Incopora una CPU industrial de 32-bits y un sistema operativo en tiempo real. Incorpora, asimismo, un Puerto RS232 (o RS485/RS422), Ethernet y WIFI que permiten transmitir datos hacia y desde la red móvil GPRS de forma sencilla y con mínimas configuraciones.
Se usa ampliamente en aplicaciones M2M, tales como tranporte, smart grid, automatización industrial, telemedida, finanzas, puntos de venta, tratamiento del agua, protección del medio ambiente, meteorología y otras muchas.
Design for Industrial Application
1. High-powered industrial cellular module
2. High-powered industrial ZigBee module
3. High-powered industrial 32 bits CPU
4. Support low power consumption mode, including multi-sleep and trigger modes to reduce the power dissipation farthest
5. Embedded Real Time Clock(RTC) circuit which can realize timing online/offline function
6. Housing: iron, providing IP30 protection
7. Power range: DC 5~35V
8. Support auto recovery mechanism, including online detect, auto redial when offline to make it always online
9. RS232/RS485/RS422 ports:15KV ESD protection
10. SIM/UIM port: 15KV ESD protection
11. Power port: reverse-voltage and overvoltage protection
12. Antenna port: lightning protection(optional)
1. Adopt terminal block interface, convenient for industrial application
Stability and Reliability
1. Support hardware and software WDT
2. TTL logic level RS232 interface can be customized
3. Support intellectual mode, enter into communication state automatically when powered
4. Provide management software for remote management
5. Support several work modes
6. Convenient configuration and maintenance interface
1. Support data transfer by cellular and ZigBee network
2. Support TCP server and support multi TCP client connection(optional)
4. Supply 5 I/O channels, compatible 2 pulse wave output channels, 2 analog inputs and one pulse input counters.
5. Support multi data centers and it can support 5 data centers at the same time
6. Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
7. Support dynamic domain name(DDNS) and IP access to data center
8. Design with standard TCP/IP protocol stack
9. Support APN/VPDN
10. Support standard RS232, RS485(or RS422) and ZigBee port that can connect to serial and ZigBee devices directly
CellularSpecification
Item | Content |
Cellular Module | Industrial cellular module |
Standard and Band | CDMA2000 1X EVDO Rev A 800MHz,800/1900MHz(optional), 450MHz (optional) CDMA2000 1X RTT, IS-95 A/B |
Bandwidth | Download speed:3.1Mbps, upload speed:1.8Mbps |
TX power | <23dBm |
RX sensitivity | <-104dBm |
ZigBeeSpecification
Item | Content |
ZigBee Module | Industrial ZigBee module |
Standard and Band | IEEE 802.15.4 ISM 2.4 GHz |
Indoor/Urban Range | 60m 90m(for enhanced version) |
Outdoor/RF Line-of-Sight Range | 1200m 3200m(for enhanced version) |
Transmit Power | 3.1 mw (+5dBm) /Normal mode, 6.3 mw (+8dBm)/Boost mode 63 mw (+18dBm) (for enhanced version) |
Bandwidth | 250Kbps |
Receiver Sensitivity | -102dBm |
Network Topologies | Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh |
Number of channels | 16 Direct Sequence Channels 15 Direct Sequence Channels (for enhanced version) |
Channels | 11 to 26 11 to 25 (for enhanced version) |
HardwareSystem
Item | Content |
CPU | Industrial 32 bits CPU |
FLASH | 512KB (Extendable) |
SRAM | 256KB(Extendable) |
InterfaceType
Item | Content |
Serial | 1 RS232 port and 1 RS485(orRS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5, 2 Parity: none, even, odd, space, mark Baud rate: 110~230400 bps |
Indicator | "Power", "ACT", "Online", "ZigBee" |
Antenna | Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) ZigBee: Standard SMA female interface, 50 ohm, lighting protection(optional) |
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
Power | Terminal block interface, reverse-voltage and overvoltage protection |
 | |
PowerInput
Item | Content |
Standard Power | DC 12V/0.5A |
Power Range | DC 5~35V |
PowerConsumption
Working States | Power Consumption |
Communication | 50-85mA@12VDC；115-160mA@5VDC |
Standby | 25mA@12VDC；45mA@5VDC |
Sleep | 8mA@12VDC；18mA@5VDC |
Timing Power Off | 0.6mA@12VDC；1mA@5VDC |
PhysicalCharacteristics
Item | Content |
Housing | Iron, providing IP30 protection |
Dimensions | 91x58.5x22 mm |
Weight | 210g |
EnvironmentalLimits
Item | Content |
Operating Temperature | -25~+65ºC (-13~+149℉) |
Extended Operating Temperature | -30~+75ºC (-22~+167℉) |
Storage Temperature | -40~+85ºC (-40~+185℉) |
Operating Humidity | 95% ( unfreezing) |