Productos
Solution
ZigBee Soporta transmission de datos según el protocolo ZigBee de corto alcance | |
Comunicaciones de alta fiabilidad Los equipos incorporan módulos wireless de rango industrial de altas prestaciones basados en componentes electrónicos de gran precision y estabilidad especialmente diseñados para su funcionamiento ininterrumpido en rangos de temperatura entre -35 ~ +75 º C. De esta forma ofrecen una comunicación estable y de gran fiabilidad en cualquier situación | |
| |
| |
| |
| |
| |
Soporte de comunicaciones VPNSoporta servidor y cliente PPTP y L2TP y servidor y cliente OpenVPN. Opcional IPSec. | |
 | Múltiples sistemas de ahorro de energíaLos dispositivos disponen de múltiples modos de ahorro de energía incluyendo la conexión o desconexión mediante SMS o llamadas perdidas |
Features Reference Networking Download
El router ZigBee GPRS WIFI modelo F8134 es un terminal cellular que permite la transmission de datos a través de la red ZigBee y GPRS de un operador móvil
Incopora una CPU industrial de 32-bits y un sistema operativo en tiempo real. Incorpora, asimismo, un Puerto RS232 (o RS485/RS422), Ethernet y WIFI que permiten transmitir datos hacia y desde la red móvil GPRS de forma sencilla y con mínimas configuraciones.
Se usa ampliamente en aplicaciones M2M, tales como tranporte, smart grid, automatización industrial, telemedida, finanzas, puntos de venta, tratamiento del agua, protección del medio ambiente, meteorología y otras muchas.
Design for Industrial Application
1. High-powered industrial cellular module
2. High-powered industrial 32bits CPU
3. High-powered industrial ZigBee module
4. Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
5. Housing: iron, providing IP30 protection.
6. Power range: DC 5~35V
Stability and Reliability
1. Support hardware and software WDT
2. Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
3. Ethernet port: 1.5KV magnetic isolation protection
4. RS232/RS485/RS422 port: 15KV ESD protection
5. SIM/UIM port: 15KV ESD protection
6. Power port: reverse-voltage and overvoltage protection
7. Antenna port: lightning protection(optional)
Standard and Convenience
1. Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
2. Support standard WAN port and PPPOE protocol that can connect to ADSL directly
3. Support intellectual mode, enter into communication state automatically when powered
4. Provide management software for remote management
5. Support several work modes
6. Convenient configuration and maintenance interface（WEB or CLI）
High-performance
1. Support multiple WAN access methods, including static ip, DHCP,L2TP,PPTP,PPPOE,3G/HSPA/4G.
2. Support ZigBee function
3. Support double link backup between LTE /EVDO and WAN(PPPOE, ADSL) (optional)
4. Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
5. Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)(only for VPN version)
6. Support local and remote firmware upgrade,import and export configure file.
7. Support NTP, RTC embedded.
8. Support mulitiple DDNS provider service.
9. Support VLANs, MAC Address clone, PPPoE Server
10. WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
11. WIFI support WEP,WPA,WPA2 encryption,Support RADIUS authentication and MAC address filter.
12. Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
13. Support APN/VPDN
14. Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
15. Full protocol support , such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
16. Schedule Reboot, Schedule Online and Offline, etc.
CellularSpecification
Cellular Module | Industrial cellular module |
Cellular Module | Industrial cellular module |
Standard and Band | LTE 700MHz CDMA 1XRTT/EVDO 800/1900MHz |
Bandwidth | LTE(DL:100Mbps,UL:50Mbps)/ CDMA2000 1X EVDO Rev A (DL:3.1Mbps,UL:1.8Mbps) |
TX power | <24dBm |
RX sensitivity | <-93.3dBm |
ZigBee Specification
Item | Content |
ZigBee Module | Industrial ZigBee Platform |
Standard and Band | IEEE 802.15.4 ISM 2.4 ~2.5GHz |
Indoor/Urban Range | 30m 90m(With PA) |
Outdoor/RF Line-of-Sight Range | 500m 2000m(With PA) |
Transmit Power | 2.82 mw (+4.5dBm) 100 mw (+20dBm) (With PA) |
Bandwidth | 250Kbps |
Receiver Sensitivity | -97dBm -103dBm(With PA) |
Network Topologies | Point-to-Point, Point-to-Multipoint, Peer-to-Peer and Mesh |
Number of channels | 16 Direct Sequence Channels |
Channel | 11 to 26 |
Max packge size | 300Bytes |
WIFI Specification
Item | Content |
Standard | IEEE802.11b/g/n |
Bandwidth | IEEE802.11b/g: 54Mbps (max) IEEE802.11n: 150Mbps (max) |
Security | WEP, WPA, WPA2, etc. WPS (optional) |
TX power | 21.5dBm（11g），26dBm（11b） |
RX sensitivity | <-72dBm@54Mpbs |
Hardware System
Item | Content |
CPU | Industrial 32bits CPU |
FLASH | 8MB(Extendable to 64MB) |
SDRAM | 64MB |
Interface type
Item | Content | ||||||||||||||||||||||||
WAN | 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection | ||||||||||||||||||||||||
LAN | 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection | ||||||||||||||||||||||||
Serial | 1 RS232(or RS485/RS422) port, 15KV ESD protection Data bits: 5, 6 ,7, 8 Stop bits: 1, 1.5(optional), 2 Parity: none, even, odd, space(optional), mark(optional) Baud rate: 2400~115200 bps | ||||||||||||||||||||||||
Indicator | "Power", "System", "Online", "ZigBee", " Local Network ", "WAN", "WIFI"“Signal Strength” | ||||||||||||||||||||||||
Antenna | Cellular: Standard SMA female interface, 50 ohm, lighting protection(optional) WIFI: Standard SMA male interface, 50 ohm, lighting protection(optional) ZigBee: standard SMA female interfaces, 50 ohm, lighting protection(optional) | ||||||||||||||||||||||||
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection | ||||||||||||||||||||||||
Power | Standard 3-PIN power jack, reverse-voltage and overvoltage protection | ||||||||||||||||||||||||
Reset | Restore the router to its original factory default settings | ||||||||||||||||||||||||
Physical Characteristics
Environmental Limits
| |||||||||||||||||||||||||
